See all accessories available from OnRobot to optimize your collaborative robot application.
Bit extenders
Bit Extenders are long bit holders that give extra reach when screwdriving in narrow spaces. There are 4 types available that can be purchased separately as accessories to your OnRobot Screwdriver: Bit extender type A 50 mm, Bit extender type B 50 mm, Bit extender type A 100 mm and Bit extender type B 100.
The High Payload Bracket for the VGP20 is designed specifically for handling boxes with poor cardboard quality. The bracket expands the vacuum area, optimizes vacuum cup positions, and minimizes the risk of dropping boxes, allowing for increased product payload. If required, an external vacuum can be connected to each of the zones to boost the vacuum flow.
The Pallet station is a mechanical guide for pallets in a pallet application. A digital "Pallet present" signal is available, and the indication lamp shows the status of the signal.
The Pallet station is normally integrated with Lift100 and the Palletizing application
software with either one or two Pallet stations.
The Pallet station has the flexibility to be mechanically assembled for a right or a left setup, dependent of the actual application.
The sturdy design can withstand hits from forklifts or trucks.
The 2FGP20 finger set for KLT boxes enhance gripper's ability to handle KLT boxes and other open plastic containers. The fingers ensure a reliable grip as they are adjustable to fit into the collar of most box variants to support the lifting and handling of the box.
The set comes with two fingers that can easily be mounted on the 2FP20 gripper, and supporting finger locks can be adjusted to the individual box type.
